ChemicalProcessPumpSuppliers CZ Series Standard Chemical Centrifugal Pump Standards 鈥?ISO 2858 鈥?ISO 5199 Operating Parameters 鈥?Capacity Q: up to 2000 m3/h (8800 GPM) 鈥?Head H: up to 160 m (525 ft) 鈥?Pressure P: up to 2.5 MPa (363 psi) 鈥?Temperature T: -30 to 180 掳c ( -20 to 356 掳F) Features 鈥?Standard modularization design 鈥?The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be removed with the volute casing left in position. The driver does not need to be removed if a spacer coupling is used. 鈥?The standard seal arrangement has three options: gland packing, single mechanical seal and double seal. 鈥?GB9113.1-2000 PN 2.5MPa suction and discharge flanges are standard. Other standards may also be required by the user. 鈥?The pump rotation is clockwise when looking from the drive end. 鈥?Jack screws (motor side) for an easier alignment setting. Choice of Materials 鈥?Carbon steel 鈥?12% chrome 鈥?Austenitic stainless steels 鈥?Duplex stainless steels 鈥?Super duplex stainless steels 鈥?Hastelloy 鈥?Special alloy steels Industrial Applications 鈥?Chemical 鈥?Oil and Gas 鈥?Power plants 鈥?Petrochemical 鈥?Coal chemical industry 鈥?Offshore 鈥?Desalination 鈥?Pulp and Paper 鈥?Water and Wastewater 鈥?Food and Beverage 鈥?Mining 鈥?General industryChemicalProcessPumpSuppliers website:http://www.lutsee-pump.com/industrial-pump/chemical-process-pump/